Abstract
ASTM F75 implants distort due to residual stress released after finishing machining operations, causing implants to fail quality requirements. Previous work has shown that a shot blasting cleaning process could be the source of this distortion. Finite element analysis (FEA) is conducted to predict stress and Almen strip arc heights for experimental comparison. 2D and 3D single impact models and 3D multiple impact models are created. 3D multiple impact models with plastically deforming shot are shown to accurately predict the stress state and distortion. For shot with hardness similar to the implants, distortion creating stress magnitudes are induced, with the greatest fluctuations in stress coming from shot velocity. The depth of the predicted compressive stress layer ranges from 0.23 to 0.6 mm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
