Abstract
Tantalum samples have been compacted by the spark-plasma-sintering (SPS) sintering method. The sintering experiments have been conducted at temperatures between 1500 °C and 1900 °C and corresponding sintering times of 1 min each. The compacted samples of cylindrical shape have been characterized in respect of their residual stress by X-ray diffraction (sin 2 ψ -method). The stress components in axial direction and in radial direction as occurring on the terminal circular faces of the samples have been determined. These results were compared with data obtained from conventional hot-pressed samples which were compacted between 1500 °C and 1700 °C for 60 min. In the lower temperature range below 1800 °C the stress parameters display no variation as a function of sintering method and sintering temperature. A dilatation parallel to the cylinder axis and a compression normal to the cylinder axis is observed. At 1900 °C significant changes are observed which coincides with structural and textural alterations in the samples.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Refractory Metals and Hard Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
