Abstract
Abstract Hydrodynamic behavior in a lab-scale Trickle Bed Reactor (I.D. 1.15 cm, L = 30 cm, filled with silica particles of 0.2–0.8 mm) has been investigated. Residence time distribution curves were determined using a step transient response via conductivity measurement varying gas flowrate (0–12 mL/min CO2–H2–O2 at 78–4.0–18 mol.%) and liquid flowrates (methanol 0.5–2.0 mL/min) at −10 °C and atmospheric pressure. We demonstrate that this reactor can be accurately modelled using a combined model of axial dispersion followed by one mixed tank reactor with absolute average deviations lower than 2.6% (maximum deviation of 6.50%). The best results were obtained for a model combining 1-tank reactor with 1.20–6.15 min of residence time in series with a plug flow with residence times from 8.1 to 38.1 min. These values highlight the prevalence of the axial dispersion over the backmixing (exemplified by the mixed tank reactor) with a contribution between 80.3% and 90.1% of the total residence time. The Peclet numbers determined were in the interval of 248.3–699.3, the highest values of Pe were obtained at the highest liquid flowrate indicating the lowest axial dispersion. Correlations with the fraction of liquid flow, gas and liquid Reynolds numbers and the Galilei number are given.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.