Abstract
The blind and random use of the combined construction method may have a great impact on tunnel stability. To determine the influence of construction method conversion on tunnel deformation and the reasonable conversion condition, a numerical model is established to simulate the construction method transforms from central diaphragm method to the benching tunneling method based on Jiaoweiqin Tunnel. The conversion condition is determined based on the results of tunnel geological prediction and in-site monitoring, and the temporary two-bench tunneling method is adopted to ensure the success of construction method conversion. Besides, the parameter analysis is done to analyze the influence of mechanical properties of surrounding rock mass and bench length on tunnel stability. Research results indicate that the construction safety should be evaluated before construction method conversion is carried out by analyzing the design blueprint, tunnel geological prediction results, geological survey reports, rock mass conditions in front of tunnel face, in-site monitoring data, and numerical simulation results. Meanwhile, the construction method conversion can be carried out in the order of central diaphragm method, two-bench tunneling method, and bench tunneling method. Parameter analysis results reveal that the deformation of primary support decreases in a negative exponential form with the increase in elasticity modulus and increases approximately linearly with the increase in bench length. For shallow buried and large cross-section tunnels, the tunnel deformation is in a small state when the elastic modulus of rock mass reaches a certain value. The construction method conversion can be carried out when the rock mass has a certain stability, and the length of construction method conversion should be small to ensure construction safety.
Highlights
Stability is one of most important things in the construction of tunnels and other underground projects (Bian et al, 2017; Wang et al, 2021; Zhao et al, 2021)
1) To ensure the success of tunnel construction method conversion, a numerical model was used to analyze the deformation of primary support during construction
2) Before the construction method conversion, the rock mass stability in front of the tunnel face should be analyzed based on the design blueprint, geological prediction, geological survey reports, and rock mass conditions in front of the tunnel face
Summary
Stability is one of most important things in the construction of tunnels and other underground projects (Bian et al, 2017; Wang et al, 2021; Zhao et al, 2021). Construction methods such as the full-face excavation method and bench tunneling method can be used when the surrounding rock mass has a certain self-stability (Liang et al, 2013; Cao C. et al, 2018; Zhang et al, 2021). For the tunnel adopting the bench tunneling method, the upper section is excavated first. Once it is excavated at a certain length, the excavation of the lower section begins. This method increases the working benches, and the interference between them is small. The construction progress is slow because there are many construction procedures, and it is not conducive to mechanized operation
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.