Abstract
In this paper, the pressure drop and heat transfer features of a microchannel applying micropin fins are investigated by numerical simulations and experiments. The microchannel, which is 20-mm long, 2.7-mm wide, and 0.3-mm deep, is fabricated with copper and consisted of staggered diamond micropin fins. The visualization experiments, by means of the advanced technology micro-particle image velocimetry (PIV), are conducted to discuss the mechanism of heat transfer by analysing the flow regimes. Meanwhile, 3D-coupled numerical simulations are applied for the combination with experiments in this research. It is found that the vortex-wake flow is stable at Reynolds number (Re) = 0 to 300, and a steady recirculating zone can be observed in the wake, where a pair of symmetrical vortices is formed. All the time, the vortex-wake flow is unstable at Re = 300 to 650. Under this situation, it is due to the decrease of vorticity that the Nusselt number (Nu) is not significantly increased as it was expected. Thus, when Nu in the pin fin microchannel is predicted, the vorticity should be considered as well as turbulent kinetic energy (TKE). Furthermore, comparative study was carried out based on the mechanism proposed in this study among three kinds of microchannel with different fins, including staggered circular pin fins (CPF), square pin fins (SPF), and diamond pin fins (DPF).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
