Research on the lightweight design and multilevel optimization method of B‐pillar of hybrid material based on side‐impact safety and multicriteria decision‐making

Abstract

AbstractThis paper designs and optimizes a new structure hybrid material B‐pillar assembly. Establish a finite element analysis model for the side impact test of an electric vehicle to verify the model's accuracy. Construct a finite element model of the hybrid material B‐pillar assembly. Combined with the static performance analysis of the B‐pillar, the laminate design of the carbon fiber composite B‐pillar reinforcement plate and optimization. For the outer and inner panels of the B‐pillar, the surrogate model method and the multiobjective optimization method are combined to set 11 design variables and 13 responses. The optimal Latin hypercube design method was used to randomly sample each design variable and fit the radial basis function (RBF) approximate model. The modified second‐generation non‐dominated sorting genetic algorithm (MNSGA‐II) was used to carry out multiobjective optimization of the mixed material B‐pillar assembly, and the multicriteria decision‐making method was used to obtain the optimal solution for the Pareto solution set. A drop weight impact test was performed on the hybrid material B‐pillar assembly. The results showed that the peak collision force of the hybrid material B‐pillar was reduced by 43.7% compared with the original steel B‐pillar, the specific energy absorption was increased by 17.5%, and the side impact safety performance was better. After optimization, the weight of the mixed material B‐column was reduced by 26.44%. The improvement rates of the intrusion amount at P2 and the intrusion speed at P1 were 23.99% and 0.63%, respectively, and the lightweight effect and side impact safety were significantly improved.Highlights The finite element analysis parameters of carbon fiber composite materials were constructed through experiments, and the basis for simulation analysis under various working conditions of the B‐pillar based on performance‐driven optimization was established. A hybrid material B‐pillar design method is proposed, which consists of a variable‐thickness high‐strength steel B‐pillar outer plate, a variable‐thickness high‐strength steel B‐pillar inner plate, and a carbon fiber composite B‐pillar reinforcement plate. The super layer of the carbon fiber composite B‐pillar reinforcement plate was optimized and the laying plan of the carbon fiber composite B‐pillar reinforcement plate was determined. Performance‐driven optimization is adopted to realize the collaboration of multilevel design and optimization methods such as B‐pillar conceptual design, detailed design, and multiobjective optimization. A modified NSGA‐II algorithm was proposed and combined with the multicriteria decision‐making method and the entropy‐weighted gray relation analysis method to determine the Pareto optimal solution and the optimal design scheme for the mixed material B‐pillar.