Abstract
With the continuous improvement in the strength of medium-thick plate materials, the hot straightening of plates at high temperatures is increasingly influencing the final defect characteristics of products. In the high-temperature hot straightening process, the temperature and straightening speed of the plate significantly influence its intrinsic material properties, which, in turn, affect the straightening characteristics of the plate. However, most current material models used in the straightening process do not consider the relationship between temperature and strain rate, which leads to an inaccurate characterization of the actual material structure. Additionally, the continuous reverse bending mechanics model for straightening does not account for the impact of different bending strain rates on the bending characteristics of the plate in the thickness direction. In this study, a numerical calculation method was employed to investigate the evolution process of stress and curvature in the roll-type hot straightening process of medium-thick plates. Experimental data and mathematical methods were utilized to develop a viscous plastic material model that accounted for temperature and strain rate. Furthermore, a cross-sectional continuous reverse bending model was established, taking into account the temperature and straightening speed, enabling a reasonable interpretation of the mechanical parameter behaviors of medium-thick plates during high-temperature straightening.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.