Research on the Flow Characteristics in the Gap of a Variable-Speed Pump-Turbine in Pump Mode

Abstract

A variable-speed pump-turbine is the core component of a hydraulic storage and energy generation station. When the pump-turbine operates at a constant speed, its response to the power grid frequency is poor. In order to improve the hydraulic efficiency of the pumped storage unit, variable-speed units are used. However, there has been no numerical study on the effect of the rotational flow characteristics within the gap of a variable-speed pump-turbine. This paper calculates the flow characteristics within the gap of a variable-speed pump-turbine under three typical pump modes (maximum head minimum flow condition, minimum head maximum flow condition, and maximum speed condition). The research results indicate that the rotational speed significantly affects the pressure distribution, velocity distribution, and turbulent kinetic energy distribution within the crown and band gaps. The higher the speed, the larger the area of the high-pressure region before the runner inlet compared to other operating conditions, and similarly, the low-pressure area after the runner outlet is also larger than in other operating conditions. The change in speed mainly affects the internal flow field of the crown gap, with the most noticeable changes occurring in the pressure and flow velocity at the inlet and outlet of the crown gap. There is a clear trend of pressure drop and velocity increase within the gap as the speed increases. However, with the increase in speed, the pressure distribution and flow velocity within the band gap remain almost the same. In addition to speed changes, it is observed that the pressure within the gap and the flow velocity within the passages are also related to the head, especially in the condition of maximum head, where this relationship becomes more noticeable.