Abstract
This paper takes the ultra-high pressure (103.5MPa) valve body as the research object and adopts the finite element method to perform simulation analysis on the three bearing conditions involved with the valve body, i.e., autofrettage pressure, discharge and working pressure. The simulation shows identical results with the theoretical calculation. The relationship between the maximum equivalent stress and autofrettage pressure during the operation of the valve is obtained from the simulation results; therefore the best autofrettage pressure is determined. When determining the maximum value of autofrettage pressure, the maximum pressure, at which reverse yield does not happen, and the complete yield pressure shall be taken into consideration, with the smaller value of the two taken after comparison and analysis. When the size of the valve body is fixed at certain value, the best autofrettage pressure is not a fixed value, but it varies with the change of working pressure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.