Research on spectral method of lost circulation layer located by transient pressure wave

Abstract

AbstractLeakage in the wellbore annulus during drilling operations can affect normal production operations, resulting in a severe waste of resources and economic loss, so it is crucial to adopt a fast and effective leak identification method for subsequent plugging operations. For the complex problem of judging the location of the leakage layer, we proposed the method of excitation pressure wave to identify the location of the leakage layer. By analyzing the transfer of pressure waves within the annular pipe system and the pressure head response spectrum, the leak's location is identified based on the location of the resonance point and the change in resonance amplitude. The pressure wave signal contains too much noise. The variational mode decomposition (VMD) algorithm and the Hilbert joint spectrum were used to extract the main frequency components to reconstruct the signal to achieve the denoising effect. On this basis, the reconstructed signal is processed by fast Fourier transform (FFT) to obtain the pressure wave response spectrum, analyze the frequency domain features, and then determine the location of the leakage layer. The experimental results verify that: ① When a leak occurs in the wellbore annulus, the pressure wave will generate additional resonance points in the frequency domain due to the presence of the leak point. ② The combination of the VMD algorithm, FFT, and Hilbert joint spectrum can effectively remove the noise of the pressure wave signal. ③ The method effectively avoids the difficulty of identifying negative pressure waves in the time domain analysis of pressure wave signals. It can effectively locate the leaky layer in the frequency domain analysis. It is concluded that the principle of the method is feasible and has practical significance for field application.