Abstract
Extracting acoustic emission (AE) signals of cracks and micro-cracks after material yield phase from noise is of great significance for the study of AE character of material 2.25Cr-1Mo. In this paper wavelet was used to find out the main frequency bands of the burst cracking AE signals from the tensile test of material 2.25Cr-1Mo. Burst cracking waveform was successfully extracted from mixed waveform by reconstructing wavelet coefficients with the main frequency bands. Then the new descriptors of the waveform were determined by using of a 30% floating threshold. The DBSCAN clustering was applied to separate noise signals of electric and vibration successfully. At last the k-mean clustering was used to separate burst cracking signal data from data set effectively and accurately. According to the Analysis of the material of 2.25Cr-1Mo tensile test, the cumulative energy of burst AE signals could reflect the yield point and the degree of material damage.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.