Abstract

PurposeSpun silk is one of the top grade textile materials, and its products have high added value and meet the needs of the market. However, the technology level and process design of silk spinning are still much lower than cotton spinning; especially singeing is applied on spun silk yarn, and generates waste materials. The purpose of this paper is to introduce a kind of pneumatic compact spinning, four-line compact spinning (FLCS), into silk spinning and study the corresponding spun yarn qualities.Design/methodology/approachFirst, taking the silk spinning frame FK501 as an example, the process of modification of FLCS is presented. Then, three kinds of spun silk yarns, 80 Nm (12.5tex), 100 Nm (10tex) and 120 Nm (8.3tex), are spun on the common silk spinning frame FK501 and the spinning frame modified with FLCS. The evenness, breaking strength and hairiness of spun yarns are tested and comparatively analyzed. After the ply yarn production, three singeing procedures should be applied on the ring ply yarns, while only two singeing procedures should be applied on the compact ply yarns, which is beneficial for material saving.FindingsThe results show that compared with ring spun silk yarns, the comprehensive quality of compact spun silk yarns is improved, especially the harmful long hairiness (=3 mm) of yarn. Compared with the single spun silk yarn, the comprehensive qualities of the ply yarn are improved; especially, the breaking strength of the ply yarns is two times larger than the single yarn. After singeing, the hairiness of the ply yarn is decreased greatly, and the evenness is also improved, while the strength is decreased. Compared with ring spun silk yarn, the singeing times of compact spun silk yarn can be decreased, and the gas consumption in each singeing is also decreased, which is beneficial for material saving.Originality/valueIn this paper, a kind of pneumatic compact spinning, FLCS, is introduced into the silk spinning. It is shown that compared with ring spun silk yarns, the comprehensive quality of compact spun silk yarns is improved, especially the harmful long hairiness (=3 mm) of yarn. After the ply yarn production, three singeing procedures should be applied on the ring ply yarns, while only two singeing procedures should be applied on the compact ply yarns, which is beneficial for material saving.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.