Abstract
mLLDPE(metallocene polyethylene)/LDPE/CB(conductive carbon black) composite with positive temperature coefficient(PTC) was successfully prepared by blending. The rheology behavior and the strength of PTC of the composites were investigated through methods of rheometer test, resistance measurement, scanning electronic microscope (DSC) and scanning electron microscope (SEM) analysis. The results showed that CB can be uniformly dispersed in the mLLDPE / LDPE composite; mLLDPE/LDPE/CB composite has higher strength of PTC than this of the LDPE/CB composite. The PTC mutations temperature of mLLDPE/LDPE/CB composite increased from 358.7K to 377.3K, and also its PTC strength increased from 6.7 to 8.1 with the increasing of mLLDPE content (25wt%~75wt%) to compare with the PTC strength of traditional PTC polymer (LDPE / CB). The proper blend technology conditions of mixing rotation, temperature and time were 30r/min, 453K, 10min respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.