Abstract
With a large number of distributed power connected to the grid, there are many new node types in the distribution network. The traditional power flow calculation method cannot be applied to the distribution network with multiple distributed generations. Three kinds of distributed power grid model such as synchronous machine, asynchronous machine and inverter are established, according to the characteristics of different distributed power. The P0 node model is proposed for nodes with reactive power output as active power output and terminal voltage function. To improve the condition number of Jacobian matrix included P0 node model, the optimal multiplier is introduced to correct Jacobian matrix. Through the simulation of a variety of operation mode in certain district grid, the results show that the introduction of distributed generation has effects on the process of power flow calculation. The optimal multiplier can effectively improve the ill-posed problem of power flow caused by P0 node model, and increase the fast convergence speed of power flow calculation.
Highlights
With the development of economy and the increasing capacity of power grid, the hidden danger of power supply of large power grid is becoming more and more prominent
(3), it can be seen that the reactive power output is a function of P and U, so when the asynchronous generator is grid-connected, it can be regarded as a P0 node
According to the output characteristics of distributed power generation, the P0 node model is proposed in this paper
Summary
View the article online for updates and enhancements. - A Research on the Priority of Power Distribution Based on Graph Computing Zhongqi Mao, Aidong Xu, Wenjing Hou et al. View the article online for updates and enhancements. - A Research on the Priority of Power Distribution Based on Graph Computing Zhongqi Mao, Aidong Xu, Wenjing Hou et al. - Computational lymphatic node models in pediatric and adult hybrid phantoms for radiation dosimetry Choonsik Lee, Stephanie Lamart and Brian E Moroz. - Research on voltage reactive power optimization considering fuzzy load characteristics Chengjun Huo, Weiru Wang, Mengzan Li et al. This content was downloaded from IP address 154.13.228.172 on 28/02/2022 at 20:00
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.