Research on oxygen enrichment for municipal solid waste fly ash melting: A pilot-scale study on natural gas and coal as the melting fuel

Abstract

High energy consumption is the main obstacle of melting/vitrification technology for the disposal of municipal solid waste incineration fly ash (MSWIFA) for industrial applications. To reduce energy consumption and lower operating costs, oxygen enrichment melting was proposed and studied in this work. This research was conducted in a pilot-scale melting furnace, and three melting conditions were compared and discussed. The results showed that 66% of natural gas was saved and the operating cost was reduced by 55% when oxygen enrichment technology was applied to MSWIFA melting. When coal was used as the fuel with the oxygen enrichment melting technology, the operating cost was even lower at 66.39 dollar/ton of fly ash. Because MSWIFA was a Ca-rich material, the relatively high content of Si and Al in the coal fly ash promoted the formation of vitrificated slag, leading to a reduction in the overall pollution toxicity index (OPTI) of MSWIFA by 99.98%. Meanwhile, SO2, HCl, and secondary fly ash were the main pollutants during MSWIFA melting, and when coal was used as the fuel, the emissions of SO2 and HCl could be reduced and the OPTI of secondary fly ash was suppressed. These results suggested that to obtain the lowest operating cost and reduce secondary pollution during MSWIFA melting, the best option consisted of oxygen enrichment technology with coal as the fuel.