Research on Omnidirectional Stereo Measurement Using Convex Mirrors and Vertical Disparity

Abstract

We propose an omnidirectional measurement method without blind spots by using a convex mirror, which in principle does not cause chromatic aberration, and by using vertical disparity by installing cameras at the top and bottom of the image. In recent years, there has been significant research in the fields of autonomous cars and robots. In these fields, three-dimensional measurements of the surrounding environment have become indispensable. Depth sensing with cameras is one of the most important sensors for recognizing the surrounding environment. Previous studies have attempted to measure a wide range of areas using fisheye and full spherical panoramic cameras. However, these approaches have limitations such as blind spots and the need for multiple cameras to measure all directions. Therefore, this paper describes a stereo camera system that uses a device capable of taking an omnidirectional image with a single shot, enabling omnidirectional measurement with only two cameras. This achievement was challenging to attain with conventional stereo cameras. The results of experiments confirmed an improvement in accuracy of up to 37.4% compared to previous studies. In addition, the system succeeded in generating depth image that can recognize distances in all directions in a single frame, demonstrating the possibility of omnidirectional measurement with two cameras.