Abstract
The seismic performance index of prefabricated structures is generally obtained via experimental analysis. However, in experimental research, it is impossible that every influencing factor can be taken into account. Therefore, the finite element analysis method can be used as a supplementary method for experimental research to carry out parametric analysis of joints. Based on this test, a hysteretic model of steel bars is developed on the ABAQUS platform; meanwhile, the model is used to simulate the seismic analysis of the proposed local reinforced joints. The hysteresis curve obtained via simulation exhibits a high degree of coincidence with the experimental results. Based on the validated model, a detailed parameter analysis of prefabricated local reinforced concrete frame joints is carried out. The analysis results illustrate that the axial pressure ratio at the top of the column has a minimal impact on the joint's performance. Decreasing the stirrup ratio within the core region, enlarging the diameter of the PC steel bar, and increasing the concrete strength that is poured in the keyway and the core region can raise the cumulative energy consumption of the joints, thereby reducing the damage degree of other units and improving the maximum bearing capability of the joints.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
