Research on multiphysics coupling fields in electrochemical trepanning of lateral flow

Abstract

Electrochemical trepanning (ECTr) is an effective method for machining the ruled surface parts. Generally, the forward flow mode is used in ECTr, under which the streamlines at the outlet are divergent, resulting in the obvious flow patterns at the outlet and the instability of the machining process. In ECTr of a diffuser with a special structure, the lateral flow mode is adopted to improve the uniformity of the flow field, thereby improving the surface quality at the hub. ECTr is a complicated multiphysics coupling process. To investigate the distributions of electric field, two-phase flow field and thermal field in ECTr with lateral flow, a multiphysics coupling field model was established. In this model, a coupling relationship was formed between the various physical fields through the change of the electrolyte conductivity. And a coupled multiphysics simulation was performed to show how the gas bubbles volume fraction, electrolyte temperature, electrolyte conductivity and current density change along the flow path. Compared with the inlet of the electrolyte, the gas bubbles volume fraction and the temperature at the outlet increased by 38.8% and 6.3 K, respectively. Under the combined influence, the conductivity decreased by 7.227 S/m at the outlet, resulting in a decrease of 57.81 A/cm2 in the current density. The simulation results were then verified against those from a corresponding experiment involving lateral flow ECTr. Along the flow path, the thickness of the machined blade gradually increased, varying from 2.09 mm to 2.76 mm. The surface quality gradually deteriorated along the flow path and the surface roughness varied from Ra 0.72 μm to Ra 1.05 μm. Combining the simulation and the experiment, the correctness and the effectiveness of the multiphysics coupling model and simulation were confirmed. The results can be applied to other ECM processes.