Abstract
Al-3Ti-0.5B master alloy was prepared by reaction of Ti sponge, KBF4with aluminum melt. The morphology and distribution of the second phases effected by the feeding methods have been discussed. And the grain refining performance and the resistance to fading of the master alloy were investigated. The result shows that the Al-3Ti-0.5B master alloy which was prepared by adding mixture of Ti sponge and KBF4power into molten aluminum contains a large number of granular TiB2phase and blocky TiAl3phase. The average grain size of commercial purity aluminum was refined from 920μm to 120μm by adding 0.5wt.% of the master alloy. And the refining performance of the master alloy shows no obviously fading phenomenon when the holding time up to 30min.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
