Abstract
In the bridge expansion joint repair project, in order to ensure the efficiency of the project, the repair material needs to have better flow properties and higher early strength. The introduction of sulphoaluminate cement will significantly change the properties of UHPC. Compared with ordinary Portland cement, the composition of its cement clinker mineral belongs to another physical and chemical system, which has excellent properties such as early strength, high strength, impermeability and corrosion resistance. Therefore, different groups of UHPC were prepared by changing the content of sulphoaluminate cement, and the fluidity test of each group of slurry and the compressive strength and flexural strength test of 1d, 3d, 7d, 28d were carried out to study the sulfur. The influence of aluminate cement content on slurry fluidity and early mechanical properties in order to obtain the optimal mix ratio of UHPC materials for new bridge expansion joints.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.