Research on low-frequency bender disk transducer driven by multiple relaxor ferroelectric single crystal disks

Abstract

In this paper, we investigate the low-frequency bender disk transducer designed by the relaxor ferroelectric single crystal. First, we introduce the principle of the bender disk transducer, and use multiple single crystal disks as driving materials to excite the bending vibration mode of the metal plate, which reduces the operating frequency of the transducer. Then we establish the three-dimensional finite element model of the bender disk transducer driven by multiple single crystal disks, analyze the influence of the number and position distribution of single crystal disks on the transducer performance, and compare with that of the piezoelectric ceramic transducer with the same structure. Finally, we manufacture the proposed relaxor ferroelectric single crystal, piezoelectric ceramic transducers and the conventional piezoelectric ceramic bender disk transducer respectively, and carry out the experimental measurement in an anechoic water tank. The experimental results show that for the proposed single crystal transducer, its measured maximum transmitting voltage response (TVR) is 126.2 dB at 1.1 kHz, which is 13.4 dB higher than that of the proposed piezoelectric ceramic transducer, and its frequency corresponding to the maximum TVR is reduced by 700 Hz compared with the conventional piezoelectric ceramic bender disk transducer.