Abstract
High temperature creep properties of Al2O3-SiO2 ore (65% Al2O3 by mass percentage, abbreviation for Al2O3~65) was studied. The results show that the creep rates at 1300 °C × 50h, 1400 °C × 50h and 1500 °C × 50h were-0.89% ,- 1.75%, - 5.76%,respectively. At 1300 °C, ore has good creep resistance. As the temperature increases, the high temperature creep resistance of Al2O3 ~ 65 bauxite ore is significantly reduced. Creep process can be divided into two stages: when the time t <30h, the sample are in the densification process; after 30 hours, the creep properties show that the relationship between time and the creep rate is linear. At 1300 °C, the absolute value which is the slope of the linear relationship is smaller, exhibited an excellent high-temperature creep resistance. The loading softening-temperature of Al2O3 ~ 65 bauxite ore is 1343 °C. The Sample phase and microstructure are characterized by X-ray diffraction and scanning electron microscopy (SEM). The results show that mullite reticular is formed in sample at 1300 °C; at this point, TiO2 mostly exist as Rutile. At 1400 °C and 1500 °C, TiO2 mostly exist as Aluminum titanate, Corundum phase portion into mullite.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
