Abstract

A (FPE-LG) is a new type of vehicle waste heat recovery device based on an organic Rankine cycle. It is expected to achieve the reuse of vehicle internal combustion engine waste heat and improve the comprehensive utilization rate of energy. To enable the FPE-LG to recover exhaust gas to a greater extent in practical applications, based on the FPE-LG coupling gas storage tank test platform, the gas is discharged from the expander cylinder. This paper analyzes the influence of differences to the tank volume, intake pressure, intake duration time, expansion duration time and exhaust duration time on piston motion characteristics and gas storage and release time during the cycle, and verifies the feasibility of gas working as a recycling medium. The results showed that the energy storage of lithium batteries increases with the increase of intake pressure, and the energy stored in lithium batteries during gas release is higher than that during gas storage; the intake duration time, expansion duration time and exhaust duration time have little effect on the storage of lithium battery energy during the cycle. When the intake pressure is 0.5 MPa, the volume of the gas tank is 30 L, and the intake duration time, expansion duration time and exhaust duration time are 50 ms, 80 ms and 30 ms, respectively, the maximum actual stroke of the piston can reach 89.592 mm.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call