Abstract

In order to develop a new high-efficient but low-cost sewage treatment technology, sewage treatment experiments have been accomplished in a new type sequencing batch reactor with concrete bio-films. During experiments, simulation sewage was taken as raw water, and the operation sequence of the reactor was taken as 1.25h for water input and hypoxia, 1.25h for aeration, 0.5h for precipitation and 0.5h for water discharge successively. It has been shown by the experimental results that the reactor has optimal sewage purification effects, such as its average pollutant removal rate can arrive at about 95% for COD and BOD5, near 70% for ammonia hydrogen and about 40% for total phosphorus under the experimental condition. Main factors influencing the reactor purification effect have been discovered as pollutant volume load, ratio C/N, water temperature and amount of bio-films installed in the reactor. The mechanism of their influences has been also discussed in this paper.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call