Abstract
The dust control basis of fully mechanized mining face is clear dust source characteristics. In view of the problem of unclear dust source and unknown distribution characteristics in the working area of 7.8 m large fully mechanized mining face, the fully mechanized mining face of Shendong Bulianta Coal Mine is selected as the The research object adopts the method of combining numerical simulation and field measurement to study the dust migration law based on the single action and joint action of the two main dust sources of shearer cutting coal and column moving frame, and obtains the dust migration law. According to the characteristics, the distribution of respirable dust concentration in the breathing zone of personnel in the vicinity of the shearer was further analyzed. The results show that the dust produced by dropping the column and moving the frame has the greatest impact on the dust concentration in the operator’s area. The maximum value of the respirable dust concentration in the operator’s area when cutting coal downwind and upwind is in the middle of the shearer, and originates from the shearer cutting coal. The proportions of dust source and column-moving dust source were 44.50% and 76.69%, respectively. The dust traceability research can provide a theoretical basis for the targeted management of dust in fully mechanized mining face with large mining height.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
