Abstract
To obtain spray resistance directly, a prismatic planing hull test was conducted in a towing tank in static water. The characteristic angles of the standing line and leading edge line of the spray zone were obtained through the fixed flight test of the whole prismatic planing hull. The prismatic planing hull was divided into front and rear parts along the standing line, and then the fixed flight state test of the split planing hull was carried out, and the spray resistance was directly measured by the front planing hull. The results show that the percentage of splash resistance in the total resistance is from 15.83 % to 30.10 % under the condition of high-speed planing; Split planing hull model test is an effective method for direct measurement of spray resistance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.