Research on condition operation monitoring of power system based on supervisory control and data acquisition model

Abstract

In order to better detect and identify the running state of the wind turbine equipment and its generator in the power system wind farm, and then improve the operation reliability of the wind turbine in the power system wind farm, the monitoring method of power system state operation based on Supervisory Control and Data Acquisition (SCADA) model was studied. The SCADA model pre installs different types of sensors on the units of the power system to collect, record and store the power data of the power system. The empirical wavelet transform method is selected to extract the signal characteristics from the state operation signals collected by the SCADA model. ReliefF algorithm is used to select features related to equipment status monitoring from the extracted status operation signal features. Fuzzy C-means clustering algorithm is used to analyze the correlation of feature selection results and identify power system operating conditions. According to the condition identification results of power system, support vector regression prediction algorithm is selected to output the monitoring results of power system state operation. The experimental results show that the monitoring time of the generator and other equipment is less than 100 ms, which provides a strong guarantee for the reliable operation of the power system. This result not only validates the validity of the monitoring and data acquisition model proposed in this paper, but also provides a new idea and method for the intelligent operation and safety management of power system.