Research on an Intelligent Mining Complete System of a Fully Mechanized Mining Face in Thin Coal Seam.

Abstract

The mining environment of thin coal seam working faces is generally harsh, the labor intensity is high, and the production efficiency is low. Previous studies have shown that thin coal seam mining finds it difficult to follow machines, does not have complete sets of equipment, has a low degree of automation, and has difficult system co-control, which easily causes production safety accidents. In order to effectively solve the problems existing in thin coal seam mining, Binhu Coal Mine has established intelligent fully mechanized mining and actively explored automatic coal cutting, automatic support following, and intelligent control. The combination of an SAC electro-hydraulic control system and SAP pumping station control system has been applied in 16,108 intelligent fully mechanized coal mining faces, which realizes the automatic following of underground support and the control of adjacent support, partition support, and group operation; the automatic coal cutting of the shearer is realized by editing the automatic coal-cutting state of the shearer and adjusting the automatic parameters. A centralized control center is set up, which realizes the remote control and one-button start-stop of working face equipment. Through a comparative analysis of 16,108 intelligent fully mechanized mining faces and traditional fully mechanized mining faces, it is found that intelligent fully mechanized mining faces have obvious advantages in terms of equipment maintenance, equipment operation mode, and working face efficiency, which improve the equipment and technical mining level of thin coal seam. The application of intelligent mining in Binhu Coal Mine has a great and far-reaching impact on the development of thin coal seam mining technology in China.