Abstract
Tensile, compressive-shear, and tensile-shear failure are three typical failure modes of rock- and lining-support structural materials in underground engineering. Comparative studies of the acoustic emission (AE) evolution characteristics of specimens of the same shape and size under different stress states are of great significance in determining universal disaster warning guidelines. Based on a self-developed multi-functional test system, direct tensile, compressive-shear, and tensile-shear tests were conducted on intact and jointed rock-like specimens, comparing AE amplitude and peak frequency parameters under different failure modes from the perspectives of crack scale and crack type evolution. All failure tests were monitored with microcrack propagation at an early stage until ultimate rupture occurred at the peak-load moment. As a result, the “quiet-period” could only be observed from the compressive-shear test. The AE signals distributed in three bands can be used as an indicator of failure identifications. Tensile and shear cracks can be identified by strong and weak amplitudes of low- and high-frequency signals. These results enhance the knowledge of the failure modes of rock mechanics for more applications in monitoring disasters in rock engineering.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
