Research on a stacked high-sensitivity hydroacoustic transducer

Abstract

PurposeIsland attack and defense, emergency rescue, scientific research, civilian fisheries and other fields are inseparable from timely, high-quality underwater communications. However light and other electromagnetic waves are severely attenuated in water, acoustic is currently the only energy carrier that can transmit signals over long distances in water. However, the complex water environment and serious interference bring serious challenges to underwater activities using underwater acoustic sensors-hydroacoustic transducers. Thus, this paper aims to develop a class of high reception sensitivity hydroacoustic transducer structures to provide research and utilization ideas for related scholars.Design/methodology/approachThe electromechanical coupling coefficient is improved by converting the thickness vibration mode of the piezoelectric ceramic into the longitudinal vibration mode of the piezoelectric pillars array, and no polymer is added between the piezoelectric pillars array to reduce lateral coupling as well as internal friction, which can thus reduce the energy losses. Radial stacking in parallel can also enhance the charge generated through the positive piezoelectric effect. The optimal parameters of the structure are determined by equivalent circuit method and finite element analysis, and a hydroacoustic transducer of this structure is fabricated finally.FindingsAccording to the standard test procedure, the hydroacoustic transducer was tested in water. The tests show that the conductance curve of the stacked high-sensitivity hydroacoustic transducer tested in the air is in good agreement with the simulation results. The resonant frequency is about 118 kHz, and the receiver sensitivity is −166 dB. The stacked material hydroacoustic transducer is in the high-frequency range and has a much higher sensitivity (−166 dB) than many types of hydroacoustic transducers fabricated by piezoelectric ceramic (less than −200 dB).Research limitations/implicationsAlthough the stacked high-sensitivity hydroacoustic transducer that the authors have fabricated has a performance improvement, it has a limitation. The hollow design of the pillar arrays increases the reception stress on each pillar, and the imposed pressure comes from water also increases simultaneously, so the depth of water that the stacked high-sensitivity hydroacoustic transducer can operate in may be slightly shallower than that made of a pure piezoelectric ceramic block or a piezoelectric ceramic material with polymer added. This will be a problem to be solved in a future deployment.Practical implicationsWhether it is marine scientific research or in various fields such as civil recreation and fishing, hydroacoustic communication and necessary underwater exploration are indispensable for acoustic waves. The hydroacoustic transducer is the sensor that sends and receives sound waves, so a lot of water equipment, such as yachts, sonar buoys, and so on, cannot be separated from the hydroacoustic transducer. In addition, the complexity of the water environment also requires a good performance of the hydroacoustic transducer to facilitate the convenience and effectiveness of subsequent signal processing. Therefore, hydroacoustic transducers have great market and commercial value.Social implicationsHydroacoustic transducers are not only of great commercial value but also have a significant impact on the military as well as on people’s livelihood. As we all know, in the area of submarine communication and underwater exploration, sonar is the main force. The performance of the hydroacoustic transducer directly affects the performance of the hydroacoustic signal processing system, and ultimately directly determines the success or failure of the mission. In addition, the large-scale replacement of hydroacoustic transducers on equipment requires the concerted efforts of a large number of practitioners, such as material scientists, structural scientists, mathematicians and so on. Therefore, the rise of hydroacoustic transducers has given rise to a large number of learning positions as well as employment positions.Originality/valueTo enhance the reception sensitivity of the hydroacoustic transducer, the authors have optimized the existing hydroacoustic transducer materials and structures to propose a stacked sensitive element, which can effectively enhance the electromechanical conversion coefficient of the piezoelectric material. Furthermore, the authors have manufactured a hydroacoustic transducer using the proposed stacked sensitive element. The test results of the hydroacoustic transducer also show that the designed stacked sensitive element is of great help to enhance the reception sensitivity of the hydroacoustic transducer.