Research on a pellet co-precipitation micro-filtration process for the treatment of liquid waste containing strontium

Abstract

The chemical precipitation method for radioactive wastewater treatment has the advantages of being simple and cost-effective. However, difficulties with the solid–liquid separation and sludge concentration restrict the application of this method. In this paper, a pellet co-precipitation micro-filtration (PCM) process was studied for treating strontium-containing wastewater on a laboratory scale. The seed was prepared by CaCO3 powders. Sr2+ and CO32− were constantly crystallised on the seed surface, with Na2CO3 as the precipitating agent in the pellet reactor. The following membrane separator with the addition of FeCl3 enhanced the treatment effect. The average strontium concentrations in the raw water and in the effluent were 12.0 and 0.0220 mg/L, respectively. The strontium decontamination factor (DF) increased with the operation time, with an average value of 577. The precipitate particles formed gradually grew larger, with good sedimentation properties. When the experiment was complete, the formed precipitate was separated easily from the liquid phase and directly discharged. The concentration factor (CF) was 1,958. In the PCM process, crystallisation was the main mechanism for strontium removal, with the influent strontium level playing an important role. Membrane pore blockage and cake layer formation could help to further intercept the strontium crystallites. Furthermore, ferric chloride coagulation in the membrane separator also contributed to strontium removal. The PCM process has potential for wider application in the removal of strontium from wastewater.