Abstract
A three-dimension (3D) finite element (FE) end milling model with equivalent homogenous material (EHM) model, which was drawn from the quasi-static and SHPB (Split Hopkinson pressure bar) tests, has been developed by using ABAQUS/Explicit in order to describe the machining process of SiCp/Al6063/30P composites. The model is verified by milling experiments and it is found that the predicted milling forces at different combinations of feed rate and rotation speed are consistent with those in milling experiments, and the prediction error of the peak value of F y and F x can be controlled within 20%. Moreover, the general shapes of the predicted chips are very similar to the experimental ones, but the application of EHM material model leading to the limitation of the simulated chip morphology such as cracks on chip contact surface and free surface caused by the existence of hard SiC particles cannot be described. Hence, further microstructure-level 3D FEM model which can reveal the interactions between particles and matrix and their effect on the chip formation mechanism of SiCp/Al6063composites becomes very necessary.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: The International Journal of Advanced Manufacturing Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
