Abstract
Smelting slag from mineral process and blast furnace process to vanadium titanium magnetite is a kind of precious secondary resource in which TiO2 content is higher than 20%. Taking titanium-bearing blast furnace slag in Panzhihua region as research object, this paper analyzes four factors that affect the leaching rate of Al and Fe. The four factors are reaction temperature, reaction time, acid concentration, and the ratio of acid and slag. The conclusion drawn from hydrochloric acid leaching experiment is the factor that causes greatest effect to leaching rate of Al and Fe is reaction temperature, then reaction time follows. Acid concentration and the ratio of acid and slag cause insignificant affect. Appropriate leaching condition is 5h reaction time, 5mol/L hydrochloric acid concentration, 90°C~100°C reaction temperature and 1.2 the ratio of acid and slag. Max leaching rate of Al and Fe is 78.5% and 65.8% respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
