Abstract

The design of the crescent block is a key factor in the high-pressure operation of the internal meshing gear pump. In order to increase the output pressure of the pump, this article designs a new type of separable crescent plate. Then, taking a certain type of high-pressure internal meshing gear pump as the research object, a nonlinear differential equation for the internal flow field of the gear pump was established, and the pressure distribution law in the transition zone of a cycle was derived. A mathematical model of the device was established based on the equilibrium conditions of the internal and external crescent block forces. Finally, experimental research was conducted on the design parameters of the separation crescent plate. The results showed that under the conditions of displacement of 100.5 ml/r, pressure of 20.5 MPa, and rotational speed of 1800 RPM, the compensation chamber angle range was 31.23°, and the pump's volumetric efficiency could reach 94.6%. There were no abnormal phenomena during the entire operation of the pump, and there was no jamming or jamming of the friction pair.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.