Research and application of thermal energy recovery and automatic monitoring system for motor equipment

Abstract

In order to achieve an automatic monitoring system for the operation status of motor equipment, the author proposes a research and application based on the thermal energy recovery and automatic monitoring system of motor equipment. The author first analyzes the operating characteristics of the motor and collects four basic parameters of the motor, namely voltage, current, speed, and temperature, in order to determine whether the motor is in normal working condition. Secondly, the system combines electrical parameter detection and acquisition, wireless network technology, industrial field bus technology, and computer user software to achieve remote real-time monitoring, control, and management of the motor?s remote travel status. This enables the entire system to achieve intelligent, networked, and systematic management, solving the technical problem of real-time control and system management that cannot be achieved in motor systems distributed in multiple locations. Finally, the monitoring results indicate that after installation and debugging, the data is displayed on the upper computer. This effect is the data collection of the motor during low speed operation, which is reflected in real-time on the control panel. The actual parameters of the motor were compared with the test parameters of this system, and the test basically achieved the desired effect, with accurate detection data.