Research and application of anti - corrosion cement slurry in formation water corrosion environment

Abstract

Corrosion of cementing cement ring causes the cement ring permeability to increase, resulting in serious casing corrosion. The casing corrosion perforation leads to an increase in water content of oil wells, low driving use of water injection wells, and imbalance of injection and production well patterns. Therefore, on the basis of conventional cementing cement, epoxy resin emulsion non-penetrating agent and corrosion inhibitor composed of rust and antibacterial materials are added to reduce the corrosion and permeability of cementing cement and reduce casing corrosion. The cement sample permeability experiment shows that adding 10% non-permeability agent and 2% corrosion inhibitor to low-density cement reduces the cement stone sample permeability from 0.075mD to 0.021mD, a decrease of 3.57 times. In the conventional density cement, adding 10% non-penetrating agent and 2% corrosion inhibitor, the permeability of the cement stone sample decreased from 0.041mD to 0.0009mD, a decrease of 4.56 times. The evaluation experiment of cement stone anti-corrosion performance shows that adding 10% non-penetrating agent and 2% corrosion inhibitor to cement can increase the corrosion resistance of cement samples by 6 times. At the same time, the thickening time and compressive strength of cement stone samples remain unchanged compared with conventional cement. Optimizing the technological measures of supporting anti-corrosion tools, and summing up a set of anti-corrosion cementing technology through the field application of anti-corrosion cement slurry, which provides strong technical support for the development of cementing technology under the corrosive environment of formation water in the oil field.