Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling

Abstract

Fused Deposition Modeling (FDM) is used for prototypes, single-partproduction and small batch productions of thermoplastic components. This manufacturing technique has the huge benefit that no forming tool is needed. The knowledge about dimensional deviations which occur in the FDM process is necessary for calculating fits and for determining tolerances. A major challenge is the reproducibility of the dimensional accuracy of FDM parts and the reproducibility between different FDM machines. There are many influential factors on the dimensional accuracy in the FDM process for example geometric, material-specific or process-specific factors, which are considered in this paper. The influence of the part position on the build platform of a Stratasys Fortus 400mc is analyzed in terms of the achievable dimensional accuracy. For this purpose, the temperature distribution in the actively heated build chamber is investigated and possible correlations to the dimensional accuracy are identified. The reproducibility of one machine is examined by a multiple production of the test specimens. In addition, a comparison with three other FDM machines from Stratasys is made. Afterwards, the long-term reproducibility of the dimensional accuracy is verified to consider how environmental influences such as maintenance or modification of machine components affect the dimensional accuracy of the FDM process.