Reproducibility of martensitic transformation and phase constitution in Ni–Co–Al

Abstract

Ni–Co–Al is a potential thermal and magnetic shape-memory alloy due to its high martensitic transformation (MT) temperature and good ductility. The mechanical and thermal pre-treatment of samples are shown to be crucial for a reproducible adjustment of MT. Crushing, which involves plastic deformation, suppresses MT fully. Annealing can partly restore MT, however generally, MT temperatures, crystal structure and phase constitution of the initial bulk material cannot fully be restored. MT temperatures are constant and reproducible, when keeping sample temperature below 150 °C, short time annealing at 300 °C changes MT temperatures drastically (10–40 K). A guideline is given to obtain reproducibly the desired MT and phase constitution in Ni–Co–Al. The MT temperature and phase constitution are investigated for several different alloy compositions (Ni 35.2Co 37.8Al 27.0; Ni 32.5+ x Co 39.5− x Al 28.0; Ni 33.5+ x Co 39.5− x Al 27.0; x = 0, 0.5, 1, 1.5, 2; at.%) and sample treatments. High MT temperatures around 100 °C can be obtained.