Abstract
<strong class="journal-contentHeaderColor">Abstract.</strong> The Arctic sea ice thicknesses retrieved from the CryoSat-2 satellite are significantly influenced by sea ice surface roughness, snow backscatter, and snow depth on the sea ice. This study is the first to improve the retrieval of sea ice thickness from CryoSat-2 data derived by the Alfred Wegener Institute (AWI CS2) through applying a comprehensive optimization of an improved retracking algorithm, corrected radar penetration rate, and new snow depth. The radar freeboard data was obtained from the improved retracking algorithm of the Lognormal Altimeter Retracker Model (LARM). The radar penetration rates were corrected to 0.77 for first-year ice (FYI), 0.96 for multi-year ice (MYI), and 0.91 for all ice types. The new snow depth data was derived from the Chinese satellite Feng Yun-3B with the MicroWave Radiometer Imager (FY3B/MWRI). Three individual and one combined optimization cases were created by focusing on the retracking algorithm, radar penetration rate, and snow depth, which were validated with in situ observations collected from the National Aeronautics and Space Administration Operation IceBridge (OIB), Ice Mass Balance buoys (IMB), CryoSat Validation Experiment (CryoVEX), and Alfred Wegener Institute IceBird Program (AWI IceBird). The assessment results showed that all the optimization cases had the ability to effectively improve the sea ice thickness, with similar correlation coefficients. In the validation with the four kinds of observed data, the optimization cases reduced the RMSE of AWI CS2 up to 0.23 m (25.0 %), 0.27 m (29.7 %), 0.26 m (25.5 %), and 0.22 m (23.9 %). The improved sea ice thickness retrieval retained the major distribution patterns generated by AWI CS2, but generally showed thinner sea ice thickness. In particular, in the MYI region, the difference in thickness became increasingly evident from fall to spring. The differences in the variation trend between the optimization cases and AWI CS2 were significant in some coastal regions and the central Arctic. The experiments revealed that the radar penetration rate calculation was more sensitive to sea ice density than to snow density. The sensitivity experiments suggested that the snow depth of TOPAZ4, in addition to that of FY3B/MWRI, was also applicable in improving the retrieval of sea ice thickness. The updated scheme of sea ice densities (FYI = 925 kg m<sup>−3</sup> and MYI = 902 kg m<sup>−3</sup>) can be combined with the use of comprehensive optimization to improve the retrieval of sea ice thickness. This successful optimization provided new insights into improving the sea ice thickness retrieved from CryoSat-2 and helped to further understand and quantify the spatiotemporal variations of sea ice thickness.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.