Abstract

<strong class="journal-contentHeaderColor">Abstract.</strong> A new compact static wind imaging interferometer, called the Birefringent Doppler Wind Imaging Interferometer (BIDWIN), has been developed for the purpose of observing upper atmospheric winds using suitably isolated airglow emissions. The instrument combines a field-widened birefringent delay plate placed between two crossed Wollaston prisms with an imaging system, waveplates and polarizers to produce four fixed 90<span class="inline-formula"><sup>∘</sup></span> phase-stepped images of the interference fringes conjugate to the scene of interest. A four-point algorithm is used to extract line-of-sight Doppler wind measurements across the image of the scene. The arrangement provides a similar throughput to that of a field-widened Michelson interferometer; however, the interferometric component of BIDWIN is smaller, simpler to assemble and less complicated to operate. Consequently, the instrument provides a compact, lightweight and robust alternative that can be constructed and operated with lower cost. In this paper, the instrument concept is presented, and the design and optimization of a prototype version of the instrument are discussed. Characterization of the lab prototype is presented, and the performance of the instrument is examined by applying the instrument to measure a low-velocity two-dimensional Doppler wind field with a high precision (5 m s<span class="inline-formula"><sup>−1</sup></span>) in the lab.

Highlights

  • Upper atmospheric motions in the mesosphere and lower thermosphere (MLT) region are dominated by large scale tides, planetary waves, as well as large-scale and small-scale gravity waves

  • A practical field instrument that is matched to the field-widened Michelson interferometer can be achieved by utilizing slightly larger and longer crystals to increase the path difference to D = 1 cm and increase the usable aperture area by a factor of at least 4. It is possible because the diameter of a LiNbO3 crystal can reach 100 mm. Substituting these optimized instrument parameters (D = 1 cm, UV ∼ 0.9) into Eq (4), we find that an signal-to-noise ratio (SNR) > 480 is required to achieve a wind precision

  • This paper presented the concept, design and performance testing of a compact static birefringent interferometer called Birefringent Doppler Wind Imaging Interferometer (BIDWIN)

Read more

Summary

Introduction

Upper atmospheric motions in the mesosphere and lower thermosphere (MLT) region are dominated by large scale tides, planetary waves, as well as large-scale and small-scale gravity waves. Several other interferometric techniques have been developed over the past 50 years for the purpose of detecting upper atmospheric motions using airglow emissions These instruments have provided valuable insights regarding the dynamics occurring in the region. The core component of the BIDWIN instrument is the field-widened birefringent interferometer (Langille et al, 2013a, 2020) placed between two crossed Wollaston prisms This configuration produces four images of the scene conjugate to the interference fringes at the detector (see Fig. 3). We present the overall requirements, which guide the design of a general high-resolution two-beam interferometer capable of wind measurements with precisions

Airglow emissions
Wind measurements using a two-beam interferometer
Overview
Interferometer design
The imaging system
Lab performance
Characterization and calibration
Lab wind measurements
Discussion
Findings
D A τc
Conclusions
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call