Abstract
Cantilevered steel sign structures are widely used by commercial and retail businesses. This type of structure is flexible, has a low damping, and can be vulnerable to fatigue cracking due to wind-induced vibration. Damage and collapses of some sign structures due to fatigue and fracture at the sleeve connections have been reported. A common practice of strengthening or repairing the joint by welded gussets was not effective in mitigating fatigue cracking. To develop effective and economical repair procedures for damaged sign structures, various schemes were experimentally evaluated. Fatigue tests of three conventional connection specimens were first conducted to evaluate the fatigue resistance and the associated failure mode for comparison with field observations. Each of the three conventional specimens was then repaired by various combinations of welded gusset plates, grout, and steel cones or jackets. Testing demonstrated that conventional welded sleeve connections had a low fatigue resistance. A gusset-repaired specimen also showed a similar fatigue resistance to that of the conventional specimens. Steel-jacketing with cement grouting, or the use of a welded steel cone significantly improved the fatigue resistance of the most vulnerable fillet welded joint in the connection. This study also revealed the potential of cracking initiating from slot welds.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
