Renewable regeneration optic fiber glucose sensor based on succinylaminobenzenoboronic acid modified excessively tilted fiber grating

Abstract

BackgroundOptical fiber sensors have been used to detect glucose owing to advantages such as low cost, small size, and ease of operation etc. phenylboronic acid is one of the commonly used receptors for glucose detection, however phenylboronic acid based regenerative optical fiber sensors are commonly cumulative regeneration, renewable regeneration sensor has been missing from the literature. ResultsIn this work, instead of using phenylboronic acid, we synthesized succinylaminobenzenoboronic acid molecule (BPOA) by introducing a short chain containing carboxyl group at the other end of phenylboronic acid then covalently bonded BPOA on the surface of excessively tilted fiber grating (Ex-TFG). This provides a very stable platform for renewable regeneration and the regenerative buffer was also optimized. The proposed renewable regeneration method exhibited higher linearity and sensitivity (R2 = 0.9992, 8 pm/mM) in relative to the conventional cumulative regeneration method (R2 = 0.9718, 4.9 pm/mM). The binding affinity between BPOA and glucose was found to be almost constant over 140 bind/release cycles with a variation of less than 0.3 % relative standard deviation. SignificanceThe regenerative and label-free sensing capacity of the proposed device provides a theoretical foundation for label-free saccharide detection and the development of wearable glucose monitoring devices based on fiber optic sensors.