Removal of Typical PPCPs by Reverse Osmosis Membranes: Optimization of Treatment Process by Factorial Design

Abstract

In this paper, the removal effect of reverse osmosis (RO) on three common pharmaceuticals and personal care products (PPCPs), including ibuprofen (IBU), carbamazepine (CBZ), and triclosan (TCS), were compared under different process conditions, and the removal rate of PPCPs, membrane flux, and PPCPs membrane adsorption capacity were analyzed. The removal rate increased with the increase of the influent concentration and pre-membrane pressure, while pH influenced the removal effect of different PPCPs by affecting the electrostatic interaction between pollutants and membranes. It was also found that the dynamic adsorption of PPCPs on RO membranes under different conditions complied with the pseudo-first-order reaction kinetic adsorption model. The maximum stable adsorption capacity and the adsorption rate of PPCPs on membranes under various conditions were simulated based on the model. Moreover, through factorial design, the removal rates of RO on IBU, CBZ, and TCS could reach 98.93%, 97.47%, and 99.01%, respectively, under the optimal conditions (with an influent concentration of 500 μg/L, pre-membrane pressure of 16 bar and pH = 10). By optimizing the process of removing PPCPs with the RO membrane method, the optimal process conditions of removing IBU, CBZ, and TCS with the RO membrane method were obtained, which provided reference conditions and data support for the practical application of removing PPCPs with the RO membrane method.