Abstract
AbstractDemands for phosphoric acid are growing rapidly in various industries. This has highlighted the importance of optimizing its production and purification methods. Phosphoric acid can be produced by a wet process. However, due to the presence of many organic and inorganic impurities in the wet product, purification of the resulting product is a major concern in this industry. Removal of trace metal impurities (such as magnesium, cadmium, chromium, zinc, etc.) from produced phosphoric acid in a wet process was investigated by foam fractionation in a semi‐batch setup using sodium dodecyl sulfate (SDS) as the surfactant. Effects of inlet air velocity, surfactant concentration, and surfactant selectivity were investigated. The optimum air velocity and surfactant concentration were obtained as 0.020 cm/min and 0.7 g/L, respectively. At the optimum condition, the total removal efficiency and enrichment factor reached were 70.2% and 4.39, respectively, while the acid loss was 8.3%. The total metal removal efficiency was increased to 95.3% in a two‐stage experimental run.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.