Removal of sulfamethoxazole from waters and wastewaters by conductive‐diamond electrochemical oxidation

Abstract

AbstractBACKGROUND: Sulfamethoxazole (SMX, used as a model bacteriostatic antibiotic) is persistent to conventional biological treatments of wastewaters. In this work, conductive‐diamond electrochemical oxidation (CDEO) was found to be an effective technology for its removal from the effluents of conventional wastewater treatment plants.RESULTS: The use of CDEO has been evaluated for the removal of the antibiotic SMX from water and wastewaters. The results show that CDEO can reduce the concentration of this organic pollutant to values below 0.1 µg dm−3. The variation of the SMX concentration during electrolysis shows a complex shape with a plateau zone that increases in size with the initial concentration of SMX. This complex trend is not observed in the changes of TOC, which seems to indicate that the CDEO of SMX solutions does not lead directly to the generation of carbon dioxide as a final product. A tentative reaction pathway has been proposed based on a thorough analysis of the reaction mixture, in which the main intermediate products were identified. The use of liquid chromatography time‐of‐flight mass spectrometry (LC‐TOFMS) allowed the identification of nine organic intermediates (with Mw 98, 108, 172, 173, 197, 203, 227, 269 and 287) during the electrolysis and the concentration of these compounds depends on the initial SMX concentration and on the current density applied.CONCLUSIONS: CDEO is able to reduce the concentration of the organic pollutant below 0.1 mg dm−3. SMX removal is faster than that of TOC. This fact indicates the formation of reaction intermediates. Analytical techniques show that nine reaction intermediates are generated in the system, and that their concentration depends on the initial SMX concentration and on the current density used. Copyright © 2012 Society of Chemical Industry