Abstract

In the direct ICP-MS determination of Cd in feed samples, significant spectral interferences caused by high concentrations of Mo can play an important role. In the present study, Mo based oxide or hydroxide polyatomic interferences were eliminated by dynamic reaction cell (DRC) with O 2 as reaction gas. Some other oxide or hydroxide interferences (i.e. Zr and Ru) were simultaneously reduced by this technology. These potentially interfering polyatomic ions 95Mo 16O +, 94Mo 16OH +, 94Zr 16OH +, 98Mo 16O +, 98Ru 16O + and 97Mo 16OH + on 111Cd + and 114Cd + were oxidized to higher oxides MoO 2 +, MoO 3 +, MoO 4 +, RuO 3 +, RuO 4 +, MoO 2H +, MoO 3H +, ZrO 2H + and ZrO 3H +. The rejection parameter q (RPq) of DRC and the flow rate of O 2 were optimized and set at 0.75 and 2.0 ml min − 1 , respectively. In addition, the residual isobaric interference of 114Sn on 114Cd was corrected using a mathematical correction equation. The limit of quantitation (LOQ) for 111Cd or 114Cd was 0.8 or 1.0 ng g − 1 and the analysis results of NIST 1567a wheat flour and 1568a rice flour standard reference materials were in good agreement with the certified values. As the routine cadmium monitoring method in our laboratory, the proposed method was applied to the accuracy determination of 562 pig feed samples for the Monitoring of Central Meat Reserves (CMR) of China.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.