Abstract
Toxic and carcinogenic reactive dyes are abundantly used in textile industries due to their wide variety of colour and texture. In this study, a hybrid separation process was used to remove four common reactive dyes (reactive yellow, red, black and brown) from aqueous solution. Synthetic solution of these dyes was subjected to adsorption by activated carbon followed by microfiltration (MF), using a ceramic membrane module. Dyes were completely removed by adsorption at pH 4.5 and the dye-loaded adsorbents were removed by cross-flow MF. Maximum Langmuir adsorption capacity of activated carbon for these four dyes was in the range of 88–106 mg/g. Effects of trans-membrane pressure drop and cross-flow rate on the throughput of the combined process was investigated. Membrane fouling was due to the cake type of layer formed by the activated carbon particles. Five different washing protocols were tested for their efficiency and the acid–alkali wash was found to be the most effective.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
