Removal of Poly Aromatic Hydrocarbons (PAHs) from Water: Effect of Nano and Modified Nano-clays as a Flocculation Aid and Adsorbent in Coagulation-flocculation Process

Abstract

Water treatment process involving simultaneous action of adsorption on different nano and organo-modified nano-clays followed by coagulation-flocculation by alum and poly aluminium chloride (PAC) has been evaluated for the removal of PAHs (naphthalene, acenaphthalene, phenanthrene, fluoranthene, anthracene, and pyrene) from water. When clay minerals along with alum and PAC were used for treatment, 37.4–100.0% removal of PAHs was observed compared to 20–38% removal using normal water treatment process with either alum or alum + PAC. The effectiveness of clay minerals for removal of PAHs followed the order (P < 0.05): halloysitenano-clay (HN-clay) < normal bentonite (NB-clay) < hydrophilic nano-bentonite (HNB-clay) < nano-montmorillonite modified with dimethyl dialkyl amine (DMDA-M-clay) ≈ nano-montmorillonite modified with octadecylamine and aminopropyltriethoxysilane (ODAAPS-M-clay) ≈ nano-montmorillonite modified with octadecylamine (ODA-M-clay) in combination with alum + PAC. The modified treatment process (alum + PAC + clay minerals), where water was initially treated with clays followed by normal process of coagulation (alum + PAC), was found to be the most effective method with maximum removal for ODAAPS-M-clay (97.7–100.0%) which is at par wih ODA-M (97.0–100.0%), and DMDA-M-clay (94.8–100%). The removal of PAHs varied in the order: naphthalene ≈ acenaphthalene > anthracene ≈ pyrene > phenanthrene > fluoranthrene. The treatment combination having the maximum removal capacity was also used eficiently for the removal of PAHs from natural and fortified natural water. This article demonstrated adsorption-coagulation integrated system has the potential to remediate PAHs polluted water.