Removal of phosphorus from water bodies using high-performance ceramsite prepared from solid wastes

Abstract

This study successfully prepared a high-performance ceramsite for phosphorus adsorption using the sintering method, incorporating regolith granite sand-washing sludge (RGSWS) and phosphate tailings as raw materials. The optimal conditions for ceramsite preparation were determined as a ratio of RGSWS to phosphate tailings at 6:4, and sintering at 900 °C for 30 min. The impacts of various factors, such as the prepared ceramsite dosage, different initial phosphorus concentrations, temperature, pH, and co-existing ions were explored, and the reusability and safety of the ceramsite were also investigated. The results show that the ceramsite has a high adsorption capacity for phosphorus (20.40 mg/g) at pH 7 with broad applicability in the pH range of 3–11 and good selective adsorption in the presence of coexisting ions. Additionally, the application of ceramsite does not cause secondary pollution, and the ceramsite still maintains a high removal rate after being reused five times. XRD, FT-IR, XPS, and SEM-EDS analysis showed that chemical precipitation, surface complexation, and electrostatic attraction were involved in the adsorption process. It can be well described by the pseudo-second-order kinetic model and the Langmuir model, and the phosphorus adsorption by ceramsite was a spontaneous endothermic reaction process with increasing chaos. This research presents an effective solution for phosphorus removal from water bodies and offers a sustainable approach toward solid waste utilization.