Abstract
The removal of phosphate from wastewater using a combination of open gradient superconducting magnetic separation (OGMS) and high gradient superconducting magnetic separation (HGMS) was investigated. The magnetic seeding material used was Fe3O4, and a novel composite inorganic coagulant was added to combine the phosphate with the magnetic seed. The important parameters that influenced the removal efficiency of phosphate in OGMS or HGMS, slow mixing time, magnetic seeding dosage, coagulant dosage, hydraulic retention time, magnetic field strength and flow rate, were systematically investigated. The performance of the OGMS–HGMS process was evaluated by treating synthetic phosphate wastewater. The results showed that all of the investigated parameters except for slow mixing time had a significant effect on phosphate removal. The phosphate concentration was reduced from 0.50 to 0.01mg/L under the following optimal reaction conditions: coagulant dosage, 50mg/L; Fe3O4, 100mg/L; magnet working current, 160A; hydraulic retention time in OGMS, 0.5min; and flow rate in HGMS, 2L/min. Overall, the use of OGMS as a pretreatment for HGMS was shown to be a good method of increasing phosphate removal efficiency while simultaneously increasing the flow rate of HGMS.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.